-
Switch / Sensor
Switch / Inductor Sensor M8x1 L=29/40 SN=3 NO is a Rear end trimming unit home position sensing / feed back sensor, used in all Brandt and NKR series edge banding machines. Safe to order along with SOLID STRIP 3-604-12-0600 and fixing Screw (CSK) 4-001-23-0082 M6x10
-
Spike roll
Spike roll is used in all Brandt and NKR series edge banding machines for transporting 2 and 3mm thick edge material smoothly
-
End Trimming Roll
End trimming tracing ROLL, KD90, Dia. 37mm, Roll with complete assembly – Consisting of Bearing, Circlip and Roll, used in all Brandt and NKR series through feed edge banding machines, Change along with fixing Screw (Axis – 3-613-01-1100)
-
Position Indicator
Position Indicator DA04-02-1-001.0-I-1D D=14H7, for Board thickness setting prior to edge banding, Suitable for Homag 1100, 1200, and NKR series of machines.
-
Buffing Ring
BUFFING RING D1=120 D2=19 16KANT B=18, Used for retaining glossyness on radius and also serves as an cleaning unit, Suitable for Homag Ambition 1100,1200 and NKR series of through feed edge banding machine.
-
Reversible Carbide Tip R2 (RCT) 82023900
Reversible carbide tips 2R, 20x12x2 for Scraping unit – With Two cutting edges, Suitable for Homag KDN 300, 430, 550, 650, Ambition 1100, 1200, and NKR series, through feed edge banding machine.
-
FLEXIBLE TUBE NW 17 PA6 / UL-VO (MUST GO WITH SILFLEX CABLE 2009)
FLEXIBLE TUBE NW 17 PA6 / UL-VO for Glue pot power cable protection (MUST GO WITH SILFLEX CABLE 2009)
-
GLASS FABRIC HOSE
GLASS FABRIC HOSE for Heating cartridge power cable protection D=3 X0.7
-
Cutting Plate for TOP Flush Trimming 0306
2R Cutting Plate for the TOP cutter, 22x14x2 DFC Single cutting edge
-
HEATING CARTRIDGE HLP D=12,5 L= 100 500 W 400 V 1
Heating Cartridge D= 12.5 L= 100 500W 400V for GLUE POT
-
HEATING CARTRIDGE HLP D=12,5 L= 100 400 W 400 V 2
Heating Cartridge D= 12.5 L= 100 400W 400V for GLUE POT
-
HEATING CARTRIDGE HLP D= 8,0 L= 130 220 W 400 V 1
Heating Cartridge D= 8 L= 130 220W 400V for Glue pot dosing assembly
-
Short Stroke Cylinder D50 H10 M10 Pre milling
Short stroke cylinder D 50 H10 M10 used in Pre milling unit / Joint trimming unit for smooth entry and exit of the cutter into the work piece
-
Short Stroke Cylinder D63 H50 G1/4 – Pre Snipping
SHORT STROKE CYLINDER D63 H 50 G1/4 for Pre Snipping unit for cutting edge material before entering End trimming process
-
Cutting Plate for TOP Flush Trimming 0306
2R Cutting Plate for the TOP cutter, 22x14x2 DFC Single cutting edge
-
HEATING CARTRIDGE HLP D= 8,0 L= 130 220 W 400 V 1
Heating Cartridge D= 8 L= 130 220W 400V for Glue pot dosing assembly
-
HEATING CARTRIDGE HLP D=12,5 L= 100 500 W 400 V 1
Heating Cartridge D= 12.5 L= 100 500W 400V for GLUE POT
-
HEATING CARTRIDGE HLP D=12,5 L= 100 400 W 400 V 2
Heating Cartridge D= 12.5 L= 100 400W 400V for GLUE POT
